College of Art and Design IT Wiki - User contributions [en]

Vizlab Scanning

2026-01-13T21:57:32Z

Kayvan:

== Available Scanning Options ==

===Small Format (HP Scanjet Enterprise)===
[[File:Enterprise.jpg|thumb|Small Format Scanner]]

* Up to 600dpi resolution
* Scan to PC or USB
*'''Flatbed'''
:* Maximum size: 300 x 432 mm (11.8 x 17 in)

*'''Sheetfed'''
:* Maximum and minimum sizes:
{|class="wikitable"
!
!Metric
!Imperial
|-
|'''Width'''
|70–300 mm
|2.75–11.8 in
|-
|'''Length'''
|148–864 mm
|5.8–34 in
|-
|'''Weight'''
|49–120 g/m2
|13–32 lb
|}
:* Can scan up to 200 sheets of 75 g/m2 (20 lb) paper, maximum is decreased as paper weight increases.

''for more info: [http://h10032.www1.hp.com/ctg/Manual/c05556173 HP Scanjet Manual]''

===Small Format Scanner===
'''Scanning using the flatbed scanner'''
:''good for media wider than 297mm(11.69") and non-paper media (wood, plastics, etc.)''
NOTE: Please insert a piece of clear film first if scanning media that could potentially scratch or mark (e.g. ink) the glass. Letter size (8.5" x 11") film sheets can be found behind the scanner.

Start by placing the media on the glass, aligning it to the top left corner. Then lower the lid; it's okay if it does not close all they way (i.e. if the media is thicker than paper).

'''Scanning using the sheetfed scanner'''
:''good for multiple sheets of media and double-sided media''
Start by placing the media on the top shelf, aligning it along the left side, then adjusting the guides to fit the width.

====Scanning to PC====
#Log into the PC on the right side of the scanner.
#Open "HPScan".
#Select a shortcut on the left for pdf or jpeg, or "Everyday Scan" for more filetypes.
#:To scan to Google Drive, Dropbox, SharePoint or OneDrive select "Everyday Scan", "More", then "Destination". Use the dropdown menu under "Send To" then "Configure" to sign in.
#Change the settings on the right as necessary.
#:Select "More" in the top right for more advanced options (e.g. dpi, color, etc.).
#If adjustments are needed, make changes using the panel on the right.
#:To zoom in before adjusting, double click the page, then select "Done" or "Cancel".
#Select "Save" and name the file.
#:Don't forget to sign out in settings if logged into a cloud account.
#Select "Exit" in the bottom right or close the window when completed.
#:If it asks to save changes to the shortcut, select "No".

====Scanning to USB====
#Insert USB into the port, found to the left of the display.
#Select "Scan to USB Drive".
#Make sure the destination is set to the USB.
#:Select the arrow next to the USB name to navigate to a specific folder.
#Name the file using the on-screen keyboard or the pull-out keyboard.
#Select "Options" in the bottom left corner to choose file type, dpi, color, etc.
#:Do this ''before'' the preview scan, as some options will be unavailable after.
#Touch the right panel to preview the scan. Make any final adjustments to the image.
#Select the green "Save" button in the bottom right.
#:If it asks to retain settings for the next job, select "Clear".

Vizlab Scanning

2026-01-13T21:56:25Z

Kayvan:

== Available Scanning Options ==

===Small Format (HP Scanjet Enterprise)===
[[File:Enterprise.jpg|thumb|Small Format Scanner]]

* Up to 600dpi resolution
* Scan to PC or USB
*'''Flatbed'''
:* Maximum size: 300 x 432 mm (11.8 x 17 in)

*'''Sheetfed'''
:* Maximum and minimum sizes:
{|class="wikitable"
!
!Metric
!Imperial
|-
|'''Width'''
|70–300 mm
|2.75–11.8 in
|-
|'''Length'''
|148–864 mm
|5.8–34 in
|-
|'''Weight'''
|49–120 g/m2
|13–32 lb
|}
:* Can scan up to 200 sheets of 75 g/m2 (20 lb) paper, maximum is decreased as paper weight increases.

''for more info: [http://h10032.www1.hp.com/ctg/Manual/c05556173 HP Scanjet Manual]''

[[File:HP_SDPro.jpg|thumb| Large Format Scanner]]
== How to Scan ==

===Small Format Scanner===
'''Scanning using the flatbed scanner'''
:''good for media wider than 297mm(11.69") and non-paper media (wood, plastics, etc.)''
NOTE: Please insert a piece of clear film first if scanning media that could potentially scratch or mark (e.g. ink) the glass. Letter size (8.5" x 11") film sheets can be found behind the scanner.

Start by placing the media on the glass, aligning it to the top left corner. Then lower the lid; it's okay if it does not close all they way (i.e. if the media is thicker than paper).

'''Scanning using the sheetfed scanner'''
:''good for multiple sheets of media and double-sided media''
Start by placing the media on the top shelf, aligning it along the left side, then adjusting the guides to fit the width.

====Scanning to PC====
#Log into the PC on the right side of the scanner.
#Open "HPScan".
#Select a shortcut on the left for pdf or jpeg, or "Everyday Scan" for more filetypes.
#:To scan to Google Drive, Dropbox, SharePoint or OneDrive select "Everyday Scan", "More", then "Destination". Use the dropdown menu under "Send To" then "Configure" to sign in.
#Change the settings on the right as necessary.
#:Select "More" in the top right for more advanced options (e.g. dpi, color, etc.).
#If adjustments are needed, make changes using the panel on the right.
#:To zoom in before adjusting, double click the page, then select "Done" or "Cancel".
#Select "Save" and name the file.
#:Don't forget to sign out in settings if logged into a cloud account.
#Select "Exit" in the bottom right or close the window when completed.
#:If it asks to save changes to the shortcut, select "No".

====Scanning to USB====
#Insert USB into the port, found to the left of the display.
#Select "Scan to USB Drive".
#Make sure the destination is set to the USB.
#:Select the arrow next to the USB name to navigate to a specific folder.
#Name the file using the on-screen keyboard or the pull-out keyboard.
#Select "Options" in the bottom left corner to choose file type, dpi, color, etc.
#:Do this ''before'' the preview scan, as some options will be unavailable after.
#Touch the right panel to preview the scan. Make any final adjustments to the image.
#Select the green "Save" button in the bottom right.
#:If it asks to retain settings for the next job, select "Clear".

===Large Format Scanner===
:''good for large media and higher dpi
Start by inserting your media image side upwards. The scanner should grab the paper to hold it in place. If scanning thicker media, please refer to the [http://h10032.www1.hp.com/ctg/Manual/c04493219 manual] and carefully remove back media guides, if necessary.

====Scanning to USB====
#Insert USB drive into port on the right side of the display.
#:If prompted with a popup upon startup, select "Hide".
#Select the "Scan" tab on the right panel.
#Select the [[File:preview.png|60px|page with magnifying glass]] icon on the bottom row to scan a preview.
#Use the right panel to make adjustments to your scan, e.g. lightness, resolution, and size.
#Ensure that "File destination:" is set to E: drive, your USB.
#:It will likely default to "D:\Images" folder. In the file navigation pop-up, go back using the ".." button.
#Select [[File:scan.png|60px|the blue button with diamond]] in the bottom right to scan and save.

If you need more step-by-step help, use the [[File:help.png|60px|online help (?)]] button in the bottom left.

Setting Up Printers on a Personal Computer

2026-01-13T21:51:59Z

Kayvan:

You may now send prints directly to the Pixel Lab printers from your personal computer while on campus or on the VPN. This is a two-step process: first, you must install the PaperCut print client and second, you must install necessary drivers and connect to the printers via the print server. Please see instructions for Windows and Mac OS X below.

'''To send a print from your personal computer, the PaperCut Client software must be running.'''

'''Please note: due to software licensing restrictions, you cannot connect directly to the HP large format color printers on Mac OS. If you need to print to these printers and you are using Mac OS, please use [[Printing from PaperCut Web Print|web print]] or the [[Printing from Lab Workstations|Pixel Lab computers]] instead.'''

== Windows ==

=== Installing the PaperCut Client ===

# Open the File Explorer. In the address bar, type '''\\desn-print''' and press Enter. If prompted for credentials, enter your PAWS ID and password. [[File:desn-print_windows.PNG]] 
# Navigate to '''PCClient\Win''' and double-click '''client-local-install.exe''' to begin installing the PaperCut client on your computer. Follow the prompts of the installer. [[File:client-local-install.PNG]] 
# You may be prompted to enter your credentials for printer access. If so, enter your PAWS ID and password. [[File:Papercut-authenticate_windows.PNG]] 


=== Connecting to Printers ===

# Open the File Explorer. In the address bar, type '''\\desn-print''' and press Enter. If prompted for credentials, enter your PAWS ID and password.
# Double-click on the printer icon of the printer you wish to connect to. Appropriate drivers will be installed and you will now be able to send a print from any program on your computer while you are on campus '''as long as the PaperCut Client software is running'''. [[File:connect-to-printer_windows.PNG]]

== Mac OS X ==

Note: the Pixel Lab Large Format Color printers are currently unavailable for direct connection on Mac OS X. Please Use [[Printing from PaperCut Web Print |Web Print]] or the [[Printing from Lab Workstations |lab computers]].

===Install the PaperCut Client===

# From the Finder, select "Go -> Connect to Server" [[File:OSX_PaperCut_1.png]]
# In the "Server Address" field, enter '''smb://desn-print.lsu.edu''' and hit connect [[File:OSX_PaperCut_2.png]]
# If prompted for credentials, select "Registered User" and enter your myLSU username and password [[File:OSX_PaperCut_3.png]]
# Select the volume "PCClient" and press OK [[File:OSX_PaperCut_4.png]]
# A Finder window will open displaying the contents of the volume. Under the "mac" folder double-click the '''client-local-install''' application and follow the on-screen prompts to install the PaperCut client on your computer [[File:OSX_PaperCut_5.png]]
# When prompted for credentials, enter your myLSU username and password.  [[File:OSX_PaperCut_6.png]]
# '''The PaperCut Client software (PCClient) must be open in order to print.''' If you would like the application to run automatically when you log in to your computer, see instructions [https://support.apple.com/en-us/HT204005 here]

===Connecting to Printers===

# Download and install the appropriate drivers for the printer to which you are trying to connect. Links to driver software for the different printers available is below:
## VizLab Small Format Color (HP LaserJet Enterprise M750), VizLab Small Format BW (HP LaserJet 700 M712), and CLab Small Format BW (HP LaserJet 700 M712):
###'''[https://support.apple.com/kb/dl1888?locale=en_US https://support.apple.com/kb/dl1888?locale=en_US]'''
## Art Xerox Phaser 7800GX
### '''[https://www.support.xerox.com/support/phaser-7800/downloads/enus.html https://www.support.xerox.com/support/phaser-7800/downloads/enus.html]'''
# Select '''System Preferences > Printers and Scanners.'''
# Click '''+''' to add a new printer.
# Control-click the toolbar; then select '''Customize Toolbar.''' [[File:OSX_PaperCut_7.png]]
# Drag the '''Advanced''' icon onto the bar; then click '''Advanced.''' [[File:OSX_PaperCut_8.png]]
# Select the '''Windows printer via spoolss''' device type and fill in the following fields:
## Enter a '''Device URL''' in the format '''smb://desn-print.lsu.edu/device_name.''' Currently available devices are listed below:
### smb://desn-print.lsu.edu/VizLab_Small_Format_Color
### smb://desn-print.lsu.edu/VizLab_Small_Format_BW
### smb://desn-print.lsu.edu/VizLab_Large_Format_BW
### smb://desn-print.lsu.edu/CLab_Small_Format_BW
### smb://desn-print.lsu.edu/Art_Xerox_Phaser_7800GX
## In '''Name''', enter a friendly and informative printer name.
## Choose a driver for this printer (which you will have installed in step 1) by selecting '''Select Software''' from the '''Use''' dropdown menu and searching for the printer type by name.
### '''Note:''' if connecting to the VizLab Large Format BW printer:
#### Extract (unzip) the driver folder previously downloaded form the Oce website.
#### Select '''Other...''' from the "Use" dropdown menu and navigate to the downloaded driver folder, called "MacOSX". Select the file '''MacOSX>English>StandardFonts>ocpw3405.ppd''' [[File:OSX_PaperCut_9.png]]
# Click '''Add.'''
# '''As long as the PaperCut Client software is running''', you can now use the printer in the same manner as any other. If you are prompted for credentials by the printer when sending a print, enter your myLSU username and password [[File:OSX_PaperCut_10.png]]

Setting Up Printers on a Personal Computer

2026-01-13T21:48:42Z

Kayvan:

You may now send prints directly to the Pixel Lab printers from your personal computer while on campus or on the VPN. This is a two-step process: first, you must install the PaperCut print client and second, you must install necessary drivers and connect to the printers via the print server. Please see instructions for Windows and Mac OS X below.

'''To send a print from your personal computer, the PaperCut Client software must be running.'''

'''Please note: due to software licensing restrictions, you cannot connect directly to the HP large format color printers on Mac OS. If you need to print to these printers and you are using Mac OS, please use [[Printing from PaperCut Web Print|web print]] or the [[Printing from Lab Workstations|VizLab computers]] instead.'''

== Windows ==

=== Installing the PaperCut Client ===

# Open the File Explorer. In the address bar, type '''\\desn-print''' and press Enter. If prompted for credentials, enter your PAWS ID and password. [[File:desn-print_windows.PNG]] 
# Navigate to '''PCClient\Win''' and double-click '''client-local-install.exe''' to begin installing the PaperCut client on your computer. Follow the prompts of the installer. [[File:client-local-install.PNG]] 
# You may be prompted to enter your credentials for printer access. If so, enter your PAWS ID and password. [[File:Papercut-authenticate_windows.PNG]] 


=== Connecting to Printers ===

# Open the File Explorer. In the address bar, type '''\\desn-print''' and press Enter. If prompted for credentials, enter your PAWS ID and password.
# Double-click on the printer icon of the printer you wish to connect to. Appropriate drivers will be installed and you will now be able to send a print from any program on your computer while you are on campus '''as long as the PaperCut Client software is running'''. [[File:connect-to-printer_windows.PNG]]

== Mac OS X ==

Note: the Pixel Lab Large Format Color printers are currently unavailable for direct connection on Mac OS X. Please Use [[Printing from PaperCut Web Print |Web Print]] or the [[Printing from Lab Workstations |lab computers]].

===Install the PaperCut Client===

# From the Finder, select "Go -> Connect to Server" [[File:OSX_PaperCut_1.png]]
# In the "Server Address" field, enter '''smb://desn-print.lsu.edu''' and hit connect [[File:OSX_PaperCut_2.png]]
# If prompted for credentials, select "Registered User" and enter your myLSU username and password [[File:OSX_PaperCut_3.png]]
# Select the volume "PCClient" and press OK [[File:OSX_PaperCut_4.png]]
# A Finder window will open displaying the contents of the volume. Under the "mac" folder double-click the '''client-local-install''' application and follow the on-screen prompts to install the PaperCut client on your computer [[File:OSX_PaperCut_5.png]]
# When prompted for credentials, enter your myLSU username and password.  [[File:OSX_PaperCut_6.png]]
# '''The PaperCut Client software (PCClient) must be open in order to print.''' If you would like the application to run automatically when you log in to your computer, see instructions [https://support.apple.com/en-us/HT204005 here]

===Connecting to Printers===

# Download and install the appropriate drivers for the printer to which you are trying to connect. Links to driver software for the different printers available is below:
## VizLab Small Format Color (HP LaserJet Enterprise M750), VizLab Small Format BW (HP LaserJet 700 M712), and CLab Small Format BW (HP LaserJet 700 M712):
###'''[https://support.apple.com/kb/dl1888?locale=en_US https://support.apple.com/kb/dl1888?locale=en_US]'''
## Art Xerox Phaser 7800GX
### '''[https://www.support.xerox.com/support/phaser-7800/downloads/enus.html https://www.support.xerox.com/support/phaser-7800/downloads/enus.html]'''
# Select '''System Preferences > Printers and Scanners.'''
# Click '''+''' to add a new printer.
# Control-click the toolbar; then select '''Customize Toolbar.''' [[File:OSX_PaperCut_7.png]]
# Drag the '''Advanced''' icon onto the bar; then click '''Advanced.''' [[File:OSX_PaperCut_8.png]]
# Select the '''Windows printer via spoolss''' device type and fill in the following fields:
## Enter a '''Device URL''' in the format '''smb://desn-print.lsu.edu/device_name.''' Currently available devices are listed below:
### smb://desn-print.lsu.edu/VizLab_Small_Format_Color
### smb://desn-print.lsu.edu/VizLab_Small_Format_BW
### smb://desn-print.lsu.edu/VizLab_Large_Format_BW
### smb://desn-print.lsu.edu/CLab_Small_Format_BW
### smb://desn-print.lsu.edu/Art_Xerox_Phaser_7800GX
## In '''Name''', enter a friendly and informative printer name.
## Choose a driver for this printer (which you will have installed in step 1) by selecting '''Select Software''' from the '''Use''' dropdown menu and searching for the printer type by name.
### '''Note:''' if connecting to the VizLab Large Format BW printer:
#### Extract (unzip) the driver folder previously downloaded form the Oce website.
#### Select '''Other...''' from the "Use" dropdown menu and navigate to the downloaded driver folder, called "MacOSX". Select the file '''MacOSX>English>StandardFonts>ocpw3405.ppd''' [[File:OSX_PaperCut_9.png]]
# Click '''Add.'''
# '''As long as the PaperCut Client software is running''', you can now use the printer in the same manner as any other. If you are prompted for credentials by the printer when sending a print, enter your myLSU username and password [[File:OSX_PaperCut_10.png]]

VizLab Printing

2026-01-13T21:35:39Z

Kayvan:

'''You are responsible for setting up your print correctly.''' '''Pixel Lab employees are NOT trained to set up prints.'''

'''Pixel Lab only accepts TigerCash. You must use your LSU ID or a TigerCash card to pay.'''

==How to Print ==

===Sign Up===
Sign up for printing [https://docs.google.com/forms/d/e/1FAIpQLScB2fhVGuPwf5wEMf2GAcFo3bZoDH8KMCEtYnPNZMaBkFeQUQ/viewform here]. It takes up to '''15 minutes''' to be added to the list of users, so do not attempt to move on to the next step until you have waited the appropriate amount of time.

'''This step may need to be repeated at the beginning of each school year, as accounts are purged during the Summer.'''

===Print===
*[[Printing from Lab Workstations | From the lab computers]]
*[[Printing from PaperCut Web Print| PaperCut Web Print]]
*[[Setting Up Printers on a Personal Computer | From your laptop]]

===Release===

Visit a release station in the print room (215) and swipe your Tiger Card. If this is your first time using the release station, or if you have replaced your Tiger Card, you will receive the message "This card is not registered with the system. Would you like to associate it with your account?" Choose "Yes".
 
[[File:PaperCut Release AssociationPrompt.png]]
 
Then, proceed to enter your myLSU username and password as prompted.
 
[[File:PaperCut Release UPPrompt.png]]
 
Finally, swipe your Tiger Card once more to login. On subsequent visits to the release station, you will simply have to swipe your Tiger Card to release prints.

== Available Printing Options ==

=== Small Format (Laser) ===
8.5in x 11in (letter) 
11in x 17in (legal) 


=== Large Format (Ink) ===
Up to 36in wide and up to 120in long:
:Light Bond
:Heavy Bond
:Glossy

== Print Pricing ==
Pricing is based on paper size selected, ''not'' by the size of your document. Please select the size closest to your document for the most accurate pricing.

{|
!style="text-align:left;"|Large Format
!style="text-align:left;"|Price per linear foot
|-
|Black and White Bond
|$1.00
|-
|Color Light Bond
|$2.00
|-
|Heavy Bond
|$4.00
|-
|Glossy
|$6.00
|-
!style="text-align:left;"|Small Format
!style="text-align:left;"|Price per page
|-
|Black and White 8.5x11
|$0.07 (on B&W Only printers)
|-
|
|$0.10 (on Color printer)
|-
|Color 8.5x11
|$0.25
|-
|Black and White 11x17
|$0.14 (on B&W Only printers)
|-
|
|$0.25 (on Color printer)
|-
|Color 11x17
|$0.50
|}



== Requesting Refunds for Prints ==

You may request a refund via PaperCut if your print is incorrect or misprinted due to a printer error. All refunds must be approved by a worker at the front desk.

#Go to [https://desn-print.lsu.edu/ https://desn-print.lsu.edu/] and sign in with your PAWS credentials
#Go to "Recent Print Jobs" on the sidebar menu
#Select '''request refund'''
#:[[Image:User Recent Print Jobs.png | 700px ]]
#Select "Full amount" or enter a partial amount and write a reason for request
#:[[Image:Refund Request .png | 700px ]]
#See a student worker at the front desk to approve your refund

'''For security reasons, refunds can only be issued as credit for future use toward Pixel Lab printing and not directly as TigerCash.

== Shared Accounts/Budget Code Charges ==

Under certain circumstances you may be granted access to a shared account to access funds charged directly to a budget code (project, grant, department, etc). To open a shared account under a budget code, please retrieve an "open account form" from the Pixel Lab front desk, fill it out with appropriate signatures from a cost center manager, and return to Kayvan Korani, [mailto:kkoran2@lsu.edu kkoran2@lsu.edu].

If you are granted access to a shared account, you will see an additional popup when printing as shown below. Under "print job actions", choose "charge to shared account" and select the desired account from the dropdown menu:

[[File:Sharedaccountpopup.PNG]]

VizLab Hardware

2026-01-13T21:28:15Z

Kayvan:

== DELL Alienware Aurora ACT1250 ==
* CPU: Intel Core Ultra 9
* Memory: 32 GB DDR5
* GPU: NVidia RTX 5080
* Storage: 2 TB NVMe M2 SSD
* 5 Stations are equipped with Alienware 34 Curved QD-OLED Gaming Monitors

== Printers, Plotters and Scanners ==
* HP DesignJet Z9+ Large Format PostScript Photo Printer (x3)
* HP DesignJet Z6200 Photo Printer
* HP PageWide XL 4600
* HP LaserJet 700 M712n Black and White Laser Printer
* HP LaserJet M750dn Color Laser Printer
* HP Scanjet Enterprise Flow N9120 fn2

LSU College of Art and Design IT Wiki

2026-01-13T21:14:38Z

Kayvan:

== Resources ==
* [[Shared Storage]]
* [[Office Printing]]
* [[internals:Internals | Internals]]

== Facilities ==
* [[C-Lab]]
* [[Mac Labs]]
* [[VizLab | Pixel Lab]]
* [https://docs.google.com/forms/d/e/1FAIpQLScB2fhVGuPwf5wEMf2GAcFo3bZoDH8KMCEtYnPNZMaBkFeQUQ/viewform?usp=sf_link Signup for Print Services]

VizLab

2026-01-13T21:11:01Z

Kayvan:

The LSU College of Art and Design Pixel Lab (formerly known as Vizlab and/or CADGIS) is located in room 215 of the LSU Julian T White Hall. Pixel Lab is dedicated to teaching and research in the areas of computer-aided design, image-processing, and more applications in architecture, art, interior design, and landscape architecture. Pixel Lab also offers services ranging from large-format printing and scanning to visual development using virtual and augmented reality. Pixel Lab is open for printing to all LSU students who have [[VizLab Printing| signed up for a PaperCut account]].

== Hours ==

{|class="wikitable"
! Day
! Time
|-
|M-F
|8:30A.M. - 5:30P.M.
|-
|Sa
|Closed
|-
|Su
|Closed
|}

== Student Resources ==
===[[VizLab Printing | How to Print in Pixel Lab]]===

===[[Vizlab Scanning | How to Scan in Pixel Lab]]===

===[[VizLab Software | Pixel Lab Software]]===

===[[VizLab Hardware | Pixel Lab Hardware]]===

== Employee Manuals ==

[[Printer Maintenance]]



[[Adjusting Account Balances in PaperCut]]

[[Opening/Closing]]

[[Clocking In/Out]]

Mac Labs

2022-08-24T20:57:14Z

Kayvan: /* Class Schedule */

[[File:Digital_Labs.png|thumb|300x|Room 108 and 113]]

The Mac Labs can be located on the first floor of the Art Building in rooms 108 and 113, labelled as Digital Lab 1 and 2 respectively. They are often used for Digital Art and Graphic Design classes, but are free for use when not occupied.

== Hours ==
The Mac Labs are available for use outside of the following class times. Room 108 can be accessed by students using their LSU ID.

=== Class Schedule ===

NOTE: Workstations may be unavailable during the following times

[[File:Room_108.jpg|thumb|Room 108]]
[[File:Room_113.jpg|thumb|Room 113]]

'''Room 108''' - Fall 2022
{|class="wikitable"
! Day
! Class
! Time
|-
|M W
|ART 2050
|8:30AM-11:20AM
|-
|M W
|ART 2050
|12:30PM-3:20PM
|-
|M W
|ART 2050
|3:30PM-6:20PM
|-
|T TH
|ART 3020
|9:00AM-11:50AM
|-
|T TH
|ART 2050
|12:00PM-2:50PM
|-
|T TH
|ART 2020
|3:00PM-5:50PM
|-
|}

'''Room 113''' - Fall 2022
{|class="wikitable"
! Day
! Class
! Time
|-
|M W
|ART 3996
|12:30PM-3:20PM
|-
|T TH
|ART 3020
|3:00PM-5:50PM
|-
|T TH
|ART 2020
|12:00PM-2:50PM
|-
|}

== Student Resources ==

===[[VizLab_Software|Mac Lab Software]]===

===[[Mac Lab Hardware]]===

Mac Labs

2022-08-24T20:52:57Z

Kayvan: /* Class Schedule */

[[File:Digital_Labs.png|thumb|300x|Room 108 and 113]]

The Mac Labs can be located on the first floor of the Art Building in rooms 108 and 113, labelled as Digital Lab 1 and 2 respectively. They are often used for Digital Art and Graphic Design classes, but are free for use when not occupied.

== Hours ==
The Mac Labs are available for use outside of the following class times. Room 108 can be accessed by students using their LSU ID.

=== Class Schedule ===

NOTE: Workstations may be unavailable during the following times

[[File:Room_108.jpg|thumb|Room 108]]
[[File:Room_113.jpg|thumb|Room 113]]

'''Room 108''' - Fall 2022
{|class="wikitable"
! Day
! Class
! Time
|-
|M W
|ART 2050
|8:30AM-11:20AM
|-
|M W
|ART 2050
|12:30PM-3:20PM
|-
|M W
|ART 2050
|3:30PM-6:20PM
|-
|T TH
|ART 3020
|9:00AM-11:50AM
|-
|T TH
|ART 2050
|12:00PM-2:50PM
|-
|T TH
|ART 2020
|3:00PM-5:50PM
|-
|}

'''Room 113''' - Fall 2022
{|class="wikitable"
! Day
! Class
! Time
|-
|M W
|ART 2050
|8:30AM-11:20AM
|-
|M W
|ART 2551
|3:30PM-6:20PM
|-
|T TH
|ART 3996
|9:00AM-11:50AM
|-
|T TH
|ART 2551
|12:00PM-2:50PM
|-
|}

== Student Resources ==

===[[VizLab_Software|Mac Lab Software]]===

===[[Mac Lab Hardware]]===

VizLab Software

2022-08-24T20:22:21Z

Kayvan: /* Other */

== Adobe Creative Cloud ==
* Photoshop
* Illustrator
* InDesign
* Dreamweaver
* Acrobat Pro
* Premier
* After Effects
* etc...

== Autodesk ==
* AutoCAD
* Revit
* 3ds Max
* Maya

== Other ==

* ESRI ArcGIS Desktop
* Rhinoceros 6 w/ Rhinoterrain and Grasshopper extensions
* Rhinoceros 7
* Lumion
* Agisoft Metashape
* ZBrush

Printer Maintenance

2022-08-24T20:21:35Z

Kayvan: /* Oce Plotwave 340 */

== HP Z6200 ==
[[File:Z6200front.jpg]]
<ul>
<li>[[Paper]]</li>
<li>[[Ink]]</li>
<li>[[Maintenance Cartridge]]</li>
<li>[[Printheads]]</li>
</ul>

== HP LaserJet ==
[[File:LaserJetM750.jpg]]
<ul>
<li>[[LaserJet Paper|Paper]]</li>
<li>[[LaserJet Ink|Toner]]</li>
<li>[[LaserJet Toner Collection Unit|Toner Collection Unit]]</li>
</ul>

VizLab Printing

2022-08-24T20:18:02Z

Kayvan: /* Shared Accounts/Budget Code Charges */

'''You are responsible for setting up your print correctly.''' '''VizLab employees are NOT trained to set up prints.'''

'''VizLab only accepts TigerCash. You must use your LSU ID or a TigerCash card to pay.'''

==How to Print ==

===Sign Up===
Sign up for printing [https://docs.google.com/forms/d/e/1FAIpQLScB2fhVGuPwf5wEMf2GAcFo3bZoDH8KMCEtYnPNZMaBkFeQUQ/viewform here]. It takes up to '''15 minutes''' to be added to the list of users, so do not attempt to move on to the next step until you have waited the appropriate amount of time.

'''This step will need to be repeated at the beginning of each school year, as accounts are purged during the Summer.'''

===Print===
*[[Printing from Lab Workstations | From the lab computers]]
*[[Printing from PaperCut Web Print| PaperCut Web Print]]
*[[Setting Up Printers on a Personal Computer | From your laptop]]

===Release===

Visit a release station in the print room (216) and swipe your Tiger Card. If this is your first time using the release station, or if you have replaced your Tiger Card, you will receive the message "This card is not registered with the system. Would you like to associate it with your account?" Choose "Yes".
 
[[File:PaperCut Release AssociationPrompt.png]]
 
Then, proceed to enter your myLSU username and password as prompted.
 
[[File:PaperCut Release UPPrompt.png]]
 
Finally, swipe your Tiger Card once more to login. On subsequent visits to the release station, you will simply have to swipe your Tiger Card to release prints.

== Available Printing Options ==

=== Small Format (Laser) ===
8.5in x 11in (letter) 
11in x 17in (legal) 


=== Large Format (Ink) ===
Up to 36in wide and up to 120in long:
:Light Bond
:Light Bond - Black and White
:Heavy Bond
:Glossy

== Print Pricing ==
Pricing is based on paper size selected, ''not'' by the size of your document. Please select the size closest to your document for the most accurate pricing.

{|
!style="text-align:left;"|Large Format
!style="text-align:left;"|Price per linear foot
|-
|Black and White Bond
|$1.00
|-
|Color Light Bond
|$2.00
|-
|Heavy Bond
|$4.00
|-
|Glossy
|$6.00
|-
!style="text-align:left;"|Small Format
!style="text-align:left;"|Price per page
|-
|Black and White 8.5x11
|$0.07 (on B&W Only printers)
|-
|
|$0.10 (on Color printer)
|-
|Color 8.5x11
|$0.25
|-
|Black and White 11x17
|$0.14 (on B&W Only printers)
|-
|
|$0.25 (on Color printer)
|-
|Color 11x17
|$0.50
|}



== Requesting Refunds for Prints ==

You may request a refund via PaperCut if your print is incorrect or misprinted due to a printer error. All refunds must be approved by a worker at the front desk.

#Go to [https://desn-print.lsu.edu/ https://desn-print.lsu.edu/] and sign in with your PAWS credentials
#Go to "Recent Print Jobs" on the sidebar menu
#Select '''request refund'''
#:[[Image:User Recent Print Jobs.png | 700px ]]
#Select "Full amount" or enter a partial amount and write a reason for request
#:[[Image:Refund Request .png | 700px ]]
#See a student worker at the front desk to approve your refund

'''For security reasons, refunds can only be issued as credit for future use toward VizLab printing and not directly as TigerCash.

== Shared Accounts/Budget Code Charges ==

Under certain circumstances you may be granted access to a shared account to access funds charged directly to a budget code (project, grant, department, etc). To open a shared account under a budget code, please retrieve an "open account form" from the VizLab front desk, fill it out with appropriate signatures from a cost center manager, and return to Kayvan Korani, [mailto:kkoran2@lsu.edu kkoran2@lsu.edu].

If you are granted access to a shared account, you will see an additional popup when printing as shown below. Under "print job actions", choose "charge to shared account" and select the desired account from the dropdown menu:

[[File:Sharedaccountpopup.PNG]]

VizLab

2022-08-24T20:14:39Z

Kayvan: /* Class Schedule */

[[File:Vizlab_sign.jpg|thumb|150px|Vizlab sign]]

The LSU College of Art and Design Visualization Lab (formerly known as CADGIS) is located in rooms 216 and 217 of the LSU Design Building. VizLab is dedicated to teaching and research in the areas of computer-aided design, image-processing, and more applications in architecture, art, interior design, and landscape architecture. VizLab also offers services ranging from large-format printing and scanning to visual development using virtual and augmented reality. VizLab is open for printing to all LSU students who have [[VizLab Printing| signed up for a PaperCut account]].

== Hours ==

{|class="wikitable"
! Day
! Time
|-
|M-F
|8:30A.M. - 5:30P.M.
|-
|Sa
|Closed
|-
|Su
|Closed
|}

=== Class Schedule ===

NOTE: Workstations may be unavailable during the following times
'''Fall 2022'''
{|class="wikitable"
! Day
! Class
! Time
|-
| T TH
| ART 4240
| 9:00AM-12:00PM
|-
| M W
| ART 7120
| 1:00PM-4:00PM
|-
| T TH
| ART 2220
| 12:00PM-6:00PM
|-
|}

== Student Resources ==
===[[VizLab Printing | How to Print in VizLab]]===

===[[Vizlab Scanning | How to Scan in Vizlab]]===

===[[VizLab Software]]===

===[[VizLab Hardware]]===

== Employee Manuals ==

[[Printer Maintenance]]



[[Adjusting Account Balances in PaperCut]]

[[Opening/Closing]]

[[Clocking In/Out]]

VizLab Hardware

2021-10-04T15:37:15Z

Kayvan: /* Lenovo ThinkStation (x20) */

== DELL Precision 5820 Tower X-Series ==
* CPU: Intel Core i9-10900X @ 3.70 GHz
* Memory: 32 GB
* GPU: NVidia Quadro RTX 4000 8GB
* Storage: 1 TB NVMe SSD
* 16 Stations are equipped with Wacom Cintiq pen displays

== Printers, Plotters and Scanners ==
* HP DesignJet Z6200 42" Photo Printer (x3)
* HP PageWide XL 4600
* HP LaserJet 700 M712n Black and White Laser Printer
* HP LaserJet M750dn Color Laser Printer
* HP Scanjet Enterprise Flow N9120 fn2

VizLab Hardware

2021-10-04T15:17:41Z

Kayvan: /* Printers, Plotters and Scanners */

== Lenovo ThinkStation (x20) ==
* Intel Xeon E5-1660 v4 @ 3.2 GHz
* 16 GB Ram
* NVidia GeForce GTX 1060 6GB
* 256 GB SD (for OS and applications)
* 1 TB HDD (for users and storage)
* 16 Stations are equipped with Wacom Cintiq pen displays

== Printers, Plotters and Scanners ==
* HP DesignJet Z6200 42" Photo Printer (x3)
* HP PageWide XL 4600
* HP LaserJet 700 M712n Black and White Laser Printer
* HP LaserJet M750dn Color Laser Printer
* HP Scanjet Enterprise Flow N9120 fn2

VizLab

2021-10-04T15:06:52Z

Kayvan: /* Class Schedule */

[[File:Vizlab_sign.jpg|thumb|150px|Vizlab sign]]

The LSU College of Art and Design Visualization Lab (formerly known as CADGIS) is located in rooms 216 and 217 of the LSU Design Building. VizLab is dedicated to teaching and research in the areas of computer-aided design, image-processing, and more applications in architecture, art, interior design, and landscape architecture. VizLab also offers services ranging from large-format printing and scanning to visual development using virtual and augmented reality. VizLab is open for printing to all LSU students who have [[VizLab Printing| signed up for a PaperCut account]].

== Hours ==

{|class="wikitable"
! Day
! Time
|-
|M-F
|8:30A.M. - 5:30P.M.
|-
|Sa
|Closed
|-
|Su
|Closed
|}

=== Class Schedule ===

NOTE: Workstations may be unavailable during the following times
'''Fall 2021'''
{|class="wikitable"
! Day
! Class
! Time
|-
| T TH
| ART 2220
| 3:00PM-5:50PM
|-
| M W
| ART 2240
| 12:30PM-3:20PM
|-
| T TH
| ART 4230
| 9:00AM-11:50AM
|-
| M W F
| LA 4201
| 9:30AM-10:20AM
|-
|}

== Student Resources ==
===[[VizLab Printing | How to Print in VizLab]]===

===[[Vizlab Scanning | How to Scan in Vizlab]]===

===[[VizLab Software]]===

===[[VizLab Hardware]]===

== Employee Manuals ==

[[Printer Maintenance]]



[[Adjusting Account Balances in PaperCut]]

[[Opening/Closing]]

[[Clocking In/Out]]