Paper - Revision history

TJ at 17:07, 1 November 2017

2017-11-01T17:07:39Z

TJ at 18:51, 31 October 2017

2017-10-31T18:51:38Z

TJ at 18:14, 31 October 2017

2017-10-31T18:14:45Z

TJ at 18:09, 31 October 2017

2017-10-31T18:09:25Z

TJ at 18:06, 31 October 2017

2017-10-31T18:06:05Z

TJ at 18:02, 31 October 2017

2017-10-31T18:02:43Z

TJ: Created page with "

Make sure that the printer wheels are locked (the brake lever is pressed down) to prevent the printer from moving.

Release the spindle lock on the right-..."

2017-10-31T17:42:16Z

Created page with "<ul><ol> <li>Make sure that the printer wheels are locked (the brake lever is pressed down) to prevent the printer from moving.</li> <li>Release the spindle lock on the right-..."

New page

<ul><ol>
<li>Make sure that the printer wheels are locked (the brake lever is pressed down) to prevent the printer from moving.</li>
<li>Release the spindle lock on the right-hand side.</li>
<li>Remove the first end of the spindle from the right-hand side of the printer, and then move the spindle to the right in order to extract the other end. Do not insert your fingers into the spindle supports during the removal process.</li>
Figure : Removing the spindle from the printer

The spindle has a hub at each end to keep the roll in position. Remove the blue hub at the left end to mount a new roll. The hub slides along the spindle to hold rolls of different widths.
<li>Slide the lever-lock on the blue hub to the unlocked position and remove the hub (1) from the left end of the spindle.</li>
Figure : Removing the hub from the spindle

<li>Rest the roll of paper that you want to load on the loading table. The roll might be long and heavy, and you might need two people to handle it.</li>
Figure : Rest the roll on the loading table

<li>Slide the spindle into the roll. Make sure that no space exists between the roll and the fixed hub at the right end of the spindle.</li>
Figure : Sliding the roll onto the spindle

Make sure that the paper will wind off the roll in the correct direction. If it does not, remove the spindle from the roll, turn the roll 180° and rest it on the loading table. Then slide the spindle into the roll.
NOTE:
A label on the spindle also shows the correct winding direction.
Figure : The correct roll winding direction

<li>Put the blue hub on to the upper end of the spindle, and push it towards the end of the roll as shown in step 1 in the following image. Then slide the lever-lock to the locked position as shown in step 2.</li>
Figure : Placing the hub on the spindle

<li>With the blue hub on the left, insert the spindle into the left side of the printer (1), and then into the right side of the printer (2).</li>
Figure : Fitting the spindle into the printer

<li>Close the spindle lock on the right-hand side.
If you regularly use different paper types, you can change rolls more quickly if you pre-load rolls of different paper types on different spindles.</li>
<li>At the printer's front panel, select the icon, and then select Paper load > Load roll.</li>
Figure : Front panel load roll message

Alternatively, you can start loading paper without using the front panel, by feeding paper in or lifting the pinch lever when there is no paper loaded.
NOTE:
If you lift the pinch lever, you will need to align the paper manually; follow the instructions on the front panel.
<li>If printing paper info is disabled, the front panel asks you to select the paper type.</li>
<li>The front panel asks you to feed paper. When the printer detects the paper, paper checks will begin.</li>
<li>If the paper that you are using has a paper-data barcode printed on the leading edge of the roll, and printing paper info is enabled, the printer automatically reads the information. If printing paper info is disabled, the barcode is ignored.</li>
Figure : Paper-data barcode

If printing paper info is enabled and no barcode is detected on the roll that is being loaded, the front panel asks you to enter the paper type and the length of the roll you are loading. Select the paper category and paper type of the roll.
Figure : Paper categories

Select the length of the roll.
Figure : Paper lengths

<li>If some of the paper checks failed, the front panel explains the problem and helps you to load paper successfully.</li>
<li>If you have a take-up reel (a standard feature on the 1.5m printer and an optional accessory on the 1.1m printer), a message will appear on the front panel asking if you want to load paper onto the take-up reel. If you select No (or if you do not have a take-up reel) the front panel displays the Ready message and the printer is ready to print. If you select Yes, a message will appear on the front panel asking if you want to load the take-up reel now or during printing.</li>
</ol></ul>
Figure : load the take-up reel now or during printing

• If you want to load the take-up reel now, select Load take-up reel now, read through the introductory text in the section Use the take-up reel, and then continue to step 3 of the procedure.
• If you want to load the take-up reel during printing, select Load it during printing, read through the introductory text in the section Use the take-up reel, and then continue to step 3 of the procedure.
NOTE:
Familiarize yourself with the procedural steps, because loading the take-up reel while printing requires you to complete the procedure while the printer is feeding and printing paper. Loading the take-up reel during printing saves approximately 1 m of paper.

@@ Line 15: / Line 15: @@
 <li>Remove the first end of the spindle from the right-hand side of the printer, and then move the spindle to the right in order to extract the other end. Do not insert your fingers into the spindle supports during the removal process.</li>
-Figure 1: Removing the spindle from the printer
+'''Figure 1: Removing the spindle from the printer'''
 [[File:RemoveSpindle.png]]
@@ Line 22: / Line 22: @@
 <li>Slide the lever-lock on the blue hub to the unlocked position and remove the hub (1) from the left end of the spindle.</li>
-Figure 2: Removing the hub from the spindle
+'''Figure 2: Removing the hub from the spindle'''
 [[File:RemoveHubFromSpindle.png]]
@@ Line 28: / Line 28: @@
 <li>Rest the roll of paper that you want to load on the loading table. The roll might be long and heavy, and you might need two people to handle it.</li>
-Figure 3: Rest the roll on the loading table
+'''Figure 3: Rest the roll on the loading table'''
 [[File:RestRollOnLoadingTable.png]]
@@ Line 34: / Line 34: @@
 <li>Slide the spindle into the roll. Make sure that no space exists between the roll and the fixed hub at the right end of the spindle.</li>
-Figure 4: Sliding the roll onto the spindle
+'''Figure 4: Sliding the roll onto the spindle'''
 [[File:SlideRollOntoSpindle.png]]
@@ Line 41: / Line 41: @@
     NOTE: A label on the spindle also shows the correct winding direction.
-Figure 5: The correct roll winding direction
+'''Figure 5: The correct roll winding direction'''
 [[File:CorrectRollDirection.png]]
@@ Line 47: / Line 47: @@
 <li>Put the blue hub on to the upper end of the spindle, and push it towards the end of the roll as shown in step 1 in the following image. Then slide the lever-lock to the locked position as shown in step 2.</li>
-Figure 6: Placing the hub on the spindle
+'''Figure 6: Placing the hub on the spindle'''
 [[File:PlaceHubOnSpindle.png]]
@@ Line 53: / Line 53: @@
 <li>With the blue hub on the left, insert the spindle into the left side of the printer (1), and then into the right side of the printer (2).</li>
-Figure 7: Fitting the spindle into the printer
+'''Figure 7: Fitting the spindle into the printer'''
 [[File:FitSpindleIntoPrinter.png]]
@@ Line 61: / Line 61: @@
 <li>At the printer's front panel, select the [[File:Page.png]] icon, and then select Paper load > Load roll.</li>
-Figure 8: Front panel load roll message
+'''Figure 8: Front panel load roll message'''
 [[File:FrontPanelLoadRoll.png]]
 Alternatively, you can start loading paper without using the front panel, by feeding paper in or lifting the pinch lever when there is no paper loaded.
-    NOTE: If you lift the pinch lever, you will need to align the paper manually; follow the instructions on the front panel.</li>
 <li>If printing paper info is disabled, the front panel asks you to select the paper type.</li>
 <li>The front panel asks you to feed paper. When the printer detects the paper, paper checks will begin.</li>
 <li>If the paper that you are using has a paper-data barcode printed on the leading edge of the roll, and printing paper info is enabled, the printer automatically reads the information. If printing paper info is disabled, the barcode is ignored.</li>
-Figure 9: Paper-data barcode
+'''Figure 9: Paper-data barcode'''
 [[File:PaperDataBarcode.png]]
@@ Line 77: / Line 78: @@
 If printing paper info is enabled and no barcode is detected on the roll that is being loaded, the front panel asks you to enter the paper type and the length of the roll you are loading. Select the paper category and paper type of the roll.
-Figure 10: Paper categories
+'''Figure 10: Paper categories'''
 [[File:PaperCategories.png]]
@@ Line 83: / Line 84: @@
 Select the length of the roll.
-Figure 11: Paper lengths
+'''Figure 11: Paper lengths'''
 [[File:PaperLengths.png]]

← Older revision		Revision as of 18:51, 31 October 2017
Line 1:		Line 1:
		+	= Unloading Paper =
		+	<ul><ol>
		+	<li>At the printer's front panel, select the [[File:Page.png]] icon, then '''Paper unload > Unload roll.'''</li>
		+	<li>The paper is unloaded from the printer.</li>
		+	<li>Release the spindle lock.</li>
		+	<li>Remove the roll from the printer, pulling out the right end on the right side of the printer first. Do not insert your fingers into the spindle supports during the removal process.</li>
		+
		+	[[File:RemoveRoll.png]]
		+	</ol></ul>
		+
		+	= Loading Paper =
	<ul><ol>		<ul><ol>
	<li>Make sure that the printer wheels are locked (the brake lever is pressed down) to prevent the printer from moving.</li>		<li>Make sure that the printer wheels are locked (the brake lever is pressed down) to prevent the printer from moving.</li>

@@ Line 2: / Line 2: @@
 <li>Make sure that the printer wheels are locked (the brake lever is pressed down) to prevent the printer from moving.</li>
 <li>Release the spindle lock on the right-hand side.</li>
-<li>Remove the first end of the spindle from the right-hand side of the printer, and then move the spindle to the right in order to extract the other end. Do not insert your fingers into the spindle supports during the removal process.</li>
+<li>Remove the first end of the spindle from the right-hand side of the printer, and then move the spindle to the right in order to extract the other end. Do not insert your fingers into the spindle supports during the removal process.
 Figure 1: Removing the spindle from the printer
@@ Line 8: / Line 8: @@
 [[File:RemoveSpindle.png]]
-The spindle has a hub at each end to keep the roll in position. Remove the blue hub at the left end to mount a new roll. The hub slides along the spindle to hold rolls of different widths.
+The spindle has a hub at each end to keep the roll in position. Remove the blue hub at the left end to mount a new roll. The hub slides along the spindle to hold rolls of different widths.</li>
-<li>Slide the lever-lock on the blue hub to the unlocked position and remove the hub (1) from the left end of the spindle.</li>
+<li>Slide the lever-lock on the blue hub to the unlocked position and remove the hub (1) from the left end of the spindle.
 Figure 2: Removing the hub from the spindle
 [[File:RemoveHubFromSpindle.png]]
+</li>
-<li>Rest the roll of paper that you want to load on the loading table. The roll might be long and heavy, and you might need two people to handle it.</li>
+<li>Rest the roll of paper that you want to load on the loading table. The roll might be long and heavy, and you might need two people to handle it.
 Figure 3: Rest the roll on the loading table
 [[File:RestRollOnLoadingTable.png]]
+</li>
-<li>Slide the spindle into the roll. Make sure that no space exists between the roll and the fixed hub at the right end of the spindle.</li>
+<li>Slide the spindle into the roll. Make sure that no space exists between the roll and the fixed hub at the right end of the spindle.
 Figure 4: Sliding the roll onto the spindle
 [[File:SlideRollOntoSpindle.png]]
-−
 Make sure that the paper will wind off the roll in the correct direction. If it does not, remove the spindle from the roll, turn the roll 180° and rest it on the loading table. Then slide the spindle into the roll.
     NOTE: A label on the spindle also shows the correct winding direction.
@@ Line 33: / Line 33: @@
 [[File:CorrectRollDirection.png]]
+</li>
-<li>Put the blue hub on to the upper end of the spindle, and push it towards the end of the roll as shown in step 1 in the following image. Then slide the lever-lock to the locked position as shown in step 2.</li>
+<li>Put the blue hub on to the upper end of the spindle, and push it towards the end of the roll as shown in step 1 in the following image. Then slide the lever-lock to the locked position as shown in step 2.
 Figure 6: Placing the hub on the spindle
 [[File:PlaceHubOnSpindle.png]]
+</li>
-<li>With the blue hub on the left, insert the spindle into the left side of the printer (1), and then into the right side of the printer (2).</li>
+<li>With the blue hub on the left, insert the spindle into the left side of the printer (1), and then into the right side of the printer (2).
 Figure 7: Fitting the spindle into the printer
 [[File:FitSpindleIntoPrinter.png]]
+</li>
 <li>Close the spindle lock on the right-hand side.
 If you regularly use different paper types, you can change rolls more quickly if you pre-load rolls of different paper types on different spindles.</li>
-<li>At the printer's front panel, select the [[File:Page.png]] icon, and then select Paper load > Load roll.</li>
+<li>At the printer's front panel, select the [[File:Page.png]] icon, and then select Paper load > Load roll.
 Figure 8: Front panel load roll message
@@ Line 55: / Line 55: @@
 Alternatively, you can start loading paper without using the front panel, by feeding paper in or lifting the pinch lever when there is no paper loaded.
-    NOTE: If you lift the pinch lever, you will need to align the paper manually; follow the instructions on the front panel.
+    NOTE: If you lift the pinch lever, you will need to align the paper manually; follow the instructions on the front panel.</li>
 <li>If printing paper info is disabled, the front panel asks you to select the paper type.</li>
 <li>The front panel asks you to feed paper. When the printer detects the paper, paper checks will begin.</li>
-<li>If the paper that you are using has a paper-data barcode printed on the leading edge of the roll, and printing paper info is enabled, the printer automatically reads the information. If printing paper info is disabled, the barcode is ignored.</li>
+<li>If the paper that you are using has a paper-data barcode printed on the leading edge of the roll, and printing paper info is enabled, the printer automatically reads the information. If printing paper info is disabled, the barcode is ignored.
 Figure 9: Paper-data barcode
 [[File:PaperDataBarcode.png]]
-−
 If printing paper info is enabled and no barcode is detected on the roll that is being loaded, the front panel asks you to enter the paper type and the length of the roll you are loading. Select the paper category and paper type of the roll.
@@ Line 75: / Line 75: @@
 [[File:PaperLengths.png]]
+</li>
 <li>If some of the paper checks failed, the front panel explains the problem and helps you to load paper successfully.</li>
-<li>If you have a take-up reel (a standard feature on the 1.5m printer and an optional accessory on the 1.1m printer), a message will appear on the front panel asking if you want to load paper onto the take-up reel. If you select No (or if you do not have a take-up reel) the front panel displays the Ready message and the printer is ready to print. If you select Yes, a message will appear on the front panel asking if you want to load the take-up reel now or during printing.</li>
+<li>If you have a take-up reel (a standard feature on the 1.5m printer and an optional accessory on the 1.1m printer), a message will appear on the front panel asking if you want to load paper onto the take-up reel. If you select No (or if you do not have a take-up reel) the front panel displays the Ready message and the printer is ready to print. If you select Yes, a message will appear on the front panel asking if you want to load the take-up reel now or during printing.
 Figure 12: load the take-up reel now or during printing
@@ Line 86: / Line 85: @@
 •	If you want to load the take-up reel now, select Load take-up reel now, read through the introductory text in the section Use the take-up reel, and then continue to step 3 of the procedure.
 •	If you want to load the take-up reel during printing, select Load it during printing, read through the introductory text in the section Use the take-up reel, and then continue to step 3 of the procedure.
-    NOTE: Familiarize yourself with the procedural steps, because loading the take-up reel while printing requires you to complete the procedure while the printer is feeding and printing paper. Loading the take-up reel during printing saves approximately 1 m of paper.
+    NOTE: Familiarize yourself with the procedural steps, because loading the take-up reel while printing requires you to complete the procedure while the printer is feeding and printing paper. Loading the take-up reel during printing saves approximately 1 m of paper.</li>

@@ Line 3: / Line 3: @@
 <li>Release the spindle lock on the right-hand side.</li>
 <li>Remove the first end of the spindle from the right-hand side of the printer, and then move the spindle to the right in order to extract the other end. Do not insert your fingers into the spindle supports during the removal process.</li>
 Figure 1: Removing the spindle from the printer
 [[File:RemoveSpindle.png]]
 The spindle has a hub at each end to keep the roll in position. Remove the blue hub at the left end to mount a new roll. The hub slides along the spindle to hold rolls of different widths.
 <li>Slide the lever-lock on the blue hub to the unlocked position and remove the hub (1) from the left end of the spindle.</li>
 Figure 2: Removing the hub from the spindle
 [[File:RemoveHubFromSpindle.png]]
 <li>Rest the roll of paper that you want to load on the loading table. The roll might be long and heavy, and you might need two people to handle it.</li>
 Figure 3: Rest the roll on the loading table
 [[File:RestRollOnLoadingTable.png]]
 <li>Slide the spindle into the roll. Make sure that no space exists between the roll and the fixed hub at the right end of the spindle.</li>
 Figure 4: Sliding the roll onto the spindle
 [[File:SlideRollOntoSpindle.png]]
 Make sure that the paper will wind off the roll in the correct direction. If it does not, remove the spindle from the roll, turn the roll 180° and rest it on the loading table. Then slide the spindle into the roll.
     NOTE: A label on the spindle also shows the correct winding direction.
 Figure 5: The correct roll winding direction
 [[File:CorrectRollDirection.png]]
 <li>Put the blue hub on to the upper end of the spindle, and push it towards the end of the roll as shown in step 1 in the following image. Then slide the lever-lock to the locked position as shown in step 2.</li>
 Figure 6: Placing the hub on the spindle
 [[File:PlaceHubOnSpindle.png]]
 <li>With the blue hub on the left, insert the spindle into the left side of the printer (1), and then into the right side of the printer (2).</li>
 Figure 7: Fitting the spindle into the printer
 [[File:FitSpindleIntoPrinter.png]]
@@ Line 35: / Line 49: @@
 If you regularly use different paper types, you can change rolls more quickly if you pre-load rolls of different paper types on different spindles.</li>
 <li>At the printer's front panel, select the [[File:Page.png]] icon, and then select Paper load > Load roll.</li>
 Figure 8: Front panel load roll message
 [[File:FrontPanelLoadRoll.png]]
@@ Line 43: / Line 59: @@
 <li>The front panel asks you to feed paper. When the printer detects the paper, paper checks will begin.</li>
 <li>If the paper that you are using has a paper-data barcode printed on the leading edge of the roll, and printing paper info is enabled, the printer automatically reads the information. If printing paper info is disabled, the barcode is ignored.</li>
 Figure 9: Paper-data barcode
 [[File:PaperDataBarcode.png]]
 If printing paper info is enabled and no barcode is detected on the roll that is being loaded, the front panel asks you to enter the paper type and the length of the roll you are loading. Select the paper category and paper type of the roll.
 Figure 10: Paper categories
 [[File:PaperCategories.png]]
 Select the length of the roll.
 Figure 11: Paper lengths
 [[File:PaperLengths.png]]
@@ Line 57: / Line 79: @@
 <li>If you have a take-up reel (a standard feature on the 1.5m printer and an optional accessory on the 1.1m printer), a message will appear on the front panel asking if you want to load paper onto the take-up reel. If you select No (or if you do not have a take-up reel) the front panel displays the Ready message and the printer is ready to print. If you select Yes, a message will appear on the front panel asking if you want to load the take-up reel now or during printing.</li>
 </ol></ul>
 Figure 12: load the take-up reel now or during printing
 [[File:LoadTakeUpReel.png]]