LaserJet Paper

From College of Art and Design IT Wiki
Revision as of 17:30, 1 November 2017 by TJ (talk | contribs) (Created page with "= Loading Paper = # Open the tray. File:OpenTray.png # Adjust the paper-length and paper-width guides by squeezing the adjustment latches and sliding the guides to the...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Loading Paper

  1. Open the tray.

OpenTray.png

  1. Adjust the paper-length and paper-width guides by squeezing the adjustment latches and sliding the guides to the size of the paper being used.

AdjustGuides.png

  1. Load paper into the tray. Check the paper to verify the guides lightly touch the stack, but do not bend it.

LoadPaper.png

  1. Close the tray.

CloseTray.png

  1. The control panel prompts you to set the paper size and type. Select the Custom setting, and then configure the X and Y dimensions of the custom paper size.

DetermineDimensions.png 

  NOTE: See the label in the paper tray, or the following illustration, to determine the X and Y dimensions.
Retrieved from "https://it.design.lsu.edu/index.php?title=LaserJet_Paper&oldid=136"